Liso Factory Reset Verified - Evoko

: Unplug the USB drive and restart the unit. It should now boot into the initial configuration screen. 3. Alternative: Administration Panel Reset

Ignore any Windows prompts to "format the drive" after flashing; these occur because the Liso uses a non-Windows partition. 2. Execute the Factory Reset evoko liso factory reset verified

: Wait for the message: "Flash has been successfully completed!" . : Unplug the USB drive and restart the unit

: Plug the prepared reset drive into the USB port on the back/bottom of the unit. : Plug the prepared reset drive into the

This process will erase all configuration, unpair the device from Evoko Home , and revert the firmware to the version on the USB.

Insert a USB drive (at least 4GB; note that Kingston drives are often incompatible with Liso). Select the downloaded .gz image and flash it to the drive.

If you still have access to the device and only need to change settings without a full wipe, use the : Tap the Menu/Information icon on the screen.