Always calibrate your sticks inside the simulator software (e.g., ClearView or FPV Freerider) before flying to ensure the range of motion is mapped correctly.
Any radio outputting a 4–8 channel PPM signal, such as certain Futaba or JR models. Fs-sm100 usb driver
For many setups, keep the transmitter turned off . Plugging into the trainer port will often power the internal logic board without activating the RF module, saving battery and preventing interference. Always calibrate your sticks inside the simulator software
The Flysky FS-SM100 is a dedicated simulator adapter cable that connects the trainer port of an RC transmitter to a computer’s USB port. Unlike the standard "data cable" used for firmware updates, the SM100 is engineered specifically for control input, enabling realistic flight physics in software like . 2. Supported Transmitters and Compatibility Plugging into the trainer port will often power
If it appears as an "Unknown Device" in the Windows Device Manager, you may need the Silicon Labs CP210x USB to UART Bridge driver or a generic PPM driver often provided by the seller.