Gea+gforce+panel+manual+install: ((new))

Set the (0%) on the panel once the raw signal milliamps stop moving.

This board acts as the bridge between the processor and field devices via a robust RS485/Modbus network.

Force the "Load" solenoid to the maximum position and save the (100%).

Force the "Unload" solenoid to move the slide valve to the minimum position.

Standard units typically require 120Vac, 60Hz, 1Ph, 25A .

Common sizes include 22"x26"x8" and 30"x26"x8", extending up to 76" for full system controllers.