Hitarget V30 Plus Manual [top] -

Place the receiver on a tripod over a known point. Attach the UHF antenna.

Located inside the battery compartment, this is essential if you plan to use the internal GSM network for CORS connections. 2. Setting Up the Base and Rover hitarget v30 plus manual

Before powering on, familiarize yourself with the physical layout of the receiver. Place the receiver on a tripod over a known point

Using the Hi-Survey Road software on your controller, set the data link to "Internal UHF." Choose a frequency (channel) that is clear of interference. Always start by creating a new project and

Always start by creating a new project and selecting the correct Coordinate System . If you are working in a local grid, you will need to perform a Site Calibration (Control Point Alignment).

The Hi-Target V30 Plus is typically paired with software on an Android controller (like the iHand series).