Jby6201 Manual May 2026

Run water (for latex paints) or mineral spirits (for oil-based) through the system until the fluid coming out of the gun is crystal clear.

Always engage the trigger safety lock when not actively spraying. jby6201 manual

Before cleaning or servicing, turn off the power, switch to PRIME mode, and pull the gun trigger to bleed off any remaining internal pressure. Run water (for latex paints) or mineral spirits

Remove and clean the manifold filter (inside the machine) and the gun filter (inside the handle). Remove and clean the manifold filter (inside the

Ensure you are plugged into a grounded outlet to prevent static sparks. 5. Cleaning and Long-Term Storage

Before pulling the trigger, it is vital to know the limits of your hardware: Typically 1100W – 1500W (model dependent). Max Pressure: 3300 PSI (22.7 MPa). Flow Rate: Approximately 2.0 to 2.5 Liters per minute.