The Jinka JK-1351 typically uses a USB-to-Serial connection. This means that even though you are plugging a USB cable into your laptop, your computer sees it as a COM port (Serial port). To make this work, you need a specific bridge driver—most commonly the or FTDI chipset driver. 📍 Key Software Components USB Driver: Links the hardware to Windows.
Wait for Windows to attempt a "Plug and Play" discovery (it will likely fail, which is why we need the manual driver). 3. Run the Installer Open the downloaded driver file. Click .
💡 Always keep a backup of your driver installer on a USB drive. If you update Windows or move to a new computer, you’ll want that file ready to avoid downtime. If you'd like, I can help you: Find the direct download link for the CH340 driver. jinka jk 1351 driver software
This usually indicates a faulty USB cable. Jinka machines are sensitive to interference; try a shielded USB cable under 2 meters in length. Best Software for Jinka JK-1351
A "Driver install success" message should appear within seconds. Configuring the COM Port The Jinka JK-1351 typically uses a USB-to-Serial connection
Download the .zip or .exe file compatible with your OS (64-bit is standard for modern PCs). 2. Physical Connection Plug the JK-1351 into a USB port on your PC. Turn the machine on.
Most Jinka plotters require a Baud Rate of 9600 or 38400 . 📍 Key Software Components USB Driver: Links the
On Windows 10/11, you may need to "Disable Driver Signature Enforcement" in the recovery settings to allow the Jinka driver to install properly. ❌ "Device Not Recognized"
