Jte Inverter Manual [ Confirmed ]

For safety, the inverter and motor must be well-grounded, as leakage current may exceed 3.5mA. 2. Wiring and Technical Specifications

Install on metal or other non-flammable surfaces. Ensure the support can hold at least four times the inverter’s weight.

Set to 0 for control panel operation or 1 for external terminal control. Jte Inverter Manual

Never connect power cables to output terminals (U, V, W).

Use MI1/MI2 for digital forward/reverse signals and AI1/AI2 for external potentiometer speed control. 3. Basic Programming and Operation For safety, the inverter and motor must be

Proper wiring is vital for operational stability. Always disconnect input power before starting work. Standard Specifications (Typical 380V Models) AC 380V 3-phase (-15% to +10%) or 220V single-phase MPPT Range 450VDC–750VDC for 380VAC models Output Frequency 0–50Hz/60Hz Overload Capacity 150% for 1 minute; 180% for 10 seconds Key Wiring Rules:

Maintain an ambient temperature between -10°C and 50°C. For altitudes above 1,000 meters, derate the output current by 1% for every 100 meters. Ensure the support can hold at least four

For most JTE models, such as the , the control panel is used for initial configuration: Enter Programming: Press the PRGM key.