Jungheinrich Eje: 120 Error Code 4372 Work !!install!!

Inspect tiller head for mechanical play; calibrate if possible. Update firmware to expand the neutral "window". Wiring issue

Ensure the tiller is in its proper vertical starting position. The truck may inhibit operation if it detects movement or a non-neutral signal during the system start-up.

: The traction sensor in the tiller head may be sending a signal that it is slightly "active" even when the handle is at rest. jungheinrich eje 120 error code 4372 work

This error is often triggered when the truck's control system cannot find a stable zero or "neutral" position for the travel or hydraulic switches.

Troubleshooting Jungheinrich EJE 120 Error Code 4372 On the , error code 4372 indicates a lack of a neutral zone in either the drive or lift/lower functions . This most commonly points to a fault or miscalibration in the tiller head traction sensor . Core Cause: The "Neutral Zone" Issue Inspect tiller head for mechanical play; calibrate if

Inspect wire connections within the tiller head for signs of wear or breakage.

: Older software versions have a very narrow "window" for what the truck considers neutral. Jungheinrich is known to have released updates to expand this window and prevent nuisance trips. Step-by-Step Troubleshooting & Fixes The truck may inhibit operation if it detects

Check for any physical or looseness in the tiller handle mechanism that might prevent the sensor from returning to true zero.