Find a restaurant
Enter your address, city and state, or zip, or use your current location.
Warning : Never write to the radio if you haven't successfully read it first to confirm the connection is stable.
: A specific "RIB-less" (Radio Interface Box) cable that connects to the back of the radio in place of the battery.
: Connect the radio to your PC using the programming cable and power it with a 9V source. motorola gp300 programming
: Always press F3 to read the radio before making changes.
: Open the GP300.EXE file within your DOS environment. Warning : Never write to the radio if
The Motorola Radius GP300, despite being over 20 years old, remains a staple in the world of analog two-way radios due to its rugged build and reliable performance. However, programming this legacy device requires specific hardware and outdated software environments that can be challenging for modern users. Required Hardware and Tools
: The RSS is a 16-bit MS-DOS application. It rarely runs correctly on modern 64-bit Windows versions. : Always press F3 to read the radio before making changes
: Navigate to the setup menu ( F9 ) and then PC Configuration ( F3 ) to ensure the software is looking at the correct COM port.
: If you need to enter frequencies slightly outside the radio's factory limits, hold the Shift key while typing the numbers. For example, to enter 144.390 , hold shift for the numbers but release it for the decimal point. Motorola GP300: Programming in 2020 - encrypted.at