Netset Pro-44 Scanner Manual -

Press the E (Enter) key. If the frequency is valid, it will appear on the display. Repeat: Repeat these steps for other channels as needed. Operating Modes

Before programming, ensure your device has a stable power source.

You can set Channel 1 as a "Priority" channel. Press the PRI button, and the scanner will check Channel 1 every two seconds, even if it is currently listening to another frequency. Netset Pro-44 Scanner Manual

To prevent accidental button presses while the scanner is in your pocket, slide the KEYLOCK switch to the "On" position. Troubleshooting Common Issues

Turn the Squelch knob (the smaller inner knob) all the way to the left (counter-clockwise) until you hear a rushing "hiss," then turn it back just until the noise stops. How to Program Frequencies Press the E (Enter) key

Enter the starting frequency of the range you want to search. Press . Press LIMIT to set the upper frequency boundary. Press SEARCH to begin the hunt. Advanced Features

Press MANUAL , type the channel number (1–20), and press MANUAL again. Operating Modes Before programming, ensure your device has

Ensure the Squelch is not turned too far to the right and that the Volume is up.