: Power off the printer, hold the FEED button, and turn it back on. Release the button after three beeps. This prints a test sample to confirm the hardware is working.

: If the printer misses labels, it may need sensor calibration. Always calibrate after changing media types.

If the printer is not responding after installation, try these common fixes:

Setting up your OCBP-005 thermal barcode label printer on Windows 10 is straightforward once you have the right driver. This 3-inch direct thermal printer by OCOM is widely used for retail, logistics, and healthcare due to its high-speed printing (up to 127mm/s) and support for various interfaces including USB, Serial, and LAN. Where to Download the OCBP-005 Driver

: Follow the remaining on-screen prompts. Once finished, your printer should appear in the "Printers & Scanners" section of your Windows 10 settings. Troubleshooting and Configuration

: The OCBP-005 is compatible with professional label software like BarTender , which can help in designing complex barcodes or QR codes. OCBP 004/5/6/7 - Infonet

: Visit the official OCOM site or use the compatible TSC TDP-245 driver.

: Run the downloaded .exe file. You will be prompted to select a directory to unpack the installation files.

: Plug your OCBP-005 into a USB port on your Windows 10 machine. Ensure the printer is powered on.

The official driver for the OCBP-005 can be found on the OCOM Technologies Limited download page .