Parameter Settings Ver2.7 [new] May 2026

Version 2.7 often includes a or App Settings tab to fix sound conflicts:

Because these settings control critical hardware functions, they are usually protected by a passcode. On most Chinese Android car stereos (like those from , Seicane , or Hizpo ), the "Parameter Settings" or "Factory Settings" menu can be found under the following path:

Controls the brightness levels and whether the buttons light up when the car's headlights are turned on. parameter settings ver2.7

Once inside the Ver2.7 interface, you will typically see several sub-menus designed for hardware calibration and system behavior:

Changing parameters in this menu can "brick" your unit or disable the screen if the wrong resolution is selected. of the original settings before making any changes. Chinese Android Car Radio - Access Factory Settings Version 2

Switches between USB 1.1 and 2.0 protocols. If your phone isn't connecting for Android Auto or CarPlay, switching the USB speed here often solves the handshake issue. Important Safety Note

Allows you to manually assign functions (like Volume Up or Home) to the physical capacitive buttons on the side of the unit. Audio & Sound Mixing of the original settings before making any changes

Adjusts the volume of GPS instructions relative to music. Setting a "Mix" value (often around 10) prevents the music from cutting out entirely when the GPS speaks. Backlight and Color Settings

If your unit is acting up, "Parameter Settings Ver2.7" provides tools to diagnose and fix issues without a full factory reset:

If your backup camera shows a "No Signal" or "Mirror Image," you can toggle the NTSC/PAL signal type or enable/disable the reverse ruler (parking lines) here.