[better] - Racelab Top Cracked

Loose bolts allow parts to "shuck" back and forth, which hammers the material. Tighten them to "snug plus a quarter turn," but don't overdo it. Final Thoughts

When the Competition Hits Hard: Dealing with a Cracked RaceLab Top racelab top cracked

For cracked mounting tops, the best fix is "sistering." Sandwich the cracked area between two pieces of 3mm steel or aluminum plate. Bolt through the sandwich so the new plates take the structural load, leaving the cracked original piece as a mere spacer. Epoxy and Cold Weld Loose bolts allow parts to "shuck" back and

If you’re running a 25Nm direct drive wheel (like a Simucube 2 Pro or a Fanatec DD2) on a mount designed for entry-level gear, the metal or composite can eventually succumb to fatigue. Bolt through the sandwich so the new plates

Be ready to tell them exactly which wheelbase or peripherals you were using. 5. Preventing Future Cracks

RaceLab is known for high-quality engineering, but no material is invincible. Usually, a crack is the result of one of three things: