Sc67310 Ricoh Error Extra Quality May 2026

If a simple restart does not resolve the error, technical intervention may be necessary:

This error specifically points to a communication failure between the Smart Operation Panel (SOP) and the controller board. Unlike common mechanical jams, this is a software or board-level issue often triggered by:

Corrupt or outdated firmware can cause the "extra quality" control system to flag false positives. Initial Troubleshooting Steps Before replacing hardware, try these fundamental resets: sc67310 ricoh error extra quality

The Monitor Service on the Smart Operation Panel may have performed an unexpected operation.

Access the printer screen and select [Error Log] to identify if other related codes are appearing simultaneously. Advanced Solutions If a simple restart does not resolve the

For technical users, ensure the Ethernet or USB cables connecting internal modules are seated correctly.

Defective components like the Hard Disk Drive (HDD), Controller PCB, or NVRAM can disrupt this communication. Access the printer screen and select [Error Log]

To clear persistent SC codes, enter the Service Program (SP) mode. On many models, this is done by pressing [Clear Modes] , then [0][7] , and holding [Stop] until the screen changes. Navigate to System SP > 5810 (SC Reset) and restart the machine.

Technicians often find that a failing Hard Disk Drive can cause SC673-10. Disconnecting the HDD and booting the machine can help verify if the drive is the culprit.

Reflashing the system firmware can resolve software-based communication hangs.