Turn off the power at the wall outlet and unplug the charger. Remove the clamp first. Remove the Red (Positive) clamp second. Replace any battery cell caps you may have removed. Troubleshooting Common Issues
When you first turn it on, the needle will likely jump to a higher number (e.g., 3 or 4 Amps). This indicates the battery is drawing a high current because it is flat.
The Selmar Turbo 4 is generally a manual charger. It may not have an automatic "cut-off" feature. Do not leave it connected indefinitely, as this can overcharge and "cook" the battery. 5. Disconnecting the Unit
The Turbo 4 is a "trickle" or "standard" charger, not a fast charger.
Ensure the charger is unplugged from the wall outlet before connecting it to the battery. 2. Connecting the Selmar Turbo 4
Locate the Positive (+) terminal (usually red or larger) and the Negative (–) terminal (usually black or smaller).
Check the fuse. Many Selmar units have an internal or rear-accessible blade fuse that can blow if the clamps are accidentally touched together.
Follow the "Positive to Positive" rule to avoid short circuits:
Selmarturbo4batterychargerinstructions Link _best_ Site
Turn off the power at the wall outlet and unplug the charger. Remove the clamp first. Remove the Red (Positive) clamp second. Replace any battery cell caps you may have removed. Troubleshooting Common Issues
When you first turn it on, the needle will likely jump to a higher number (e.g., 3 or 4 Amps). This indicates the battery is drawing a high current because it is flat.
The Selmar Turbo 4 is generally a manual charger. It may not have an automatic "cut-off" feature. Do not leave it connected indefinitely, as this can overcharge and "cook" the battery. 5. Disconnecting the Unit selmarturbo4batterychargerinstructions link
The Turbo 4 is a "trickle" or "standard" charger, not a fast charger.
Ensure the charger is unplugged from the wall outlet before connecting it to the battery. 2. Connecting the Selmar Turbo 4 Turn off the power at the wall outlet and unplug the charger
Locate the Positive (+) terminal (usually red or larger) and the Negative (–) terminal (usually black or smaller).
Check the fuse. Many Selmar units have an internal or rear-accessible blade fuse that can blow if the clamps are accidentally touched together. Replace any battery cell caps you may have removed
Follow the "Positive to Positive" rule to avoid short circuits: