Sharp Atomic Clock Spc373 User Manual [cracked] Link

The will flash. Use the UP/DOWN buttons to adjust, then press SET . Repeat this process for Month , Date , Hour , and Minute .

Once the batteries are in, the LCD screen will turn on, and the clock will immediately begin searching for the . sharp atomic clock spc373 user manual

The clock attempts to sync every night at midnight. If it fails, it will try again an hour later. If it hasn't synced in days, try moving it to a different wall or closer to a window. The display is fading. The will flash

The clock defaults to Eastern Standard Time. You must manually select your time zone so the atomic signal displays the correct hour for your location. Once the batteries are in, the LCD screen

If you live in an area with poor signal reception, you may need to set the clock manually: Press and hold the button for 3 seconds.

Keep the clock at least 3-6 feet away from computers, TVs, or microwaves, as electronic interference can block the signal. 6. Troubleshooting Common Issues The time is off by exactly one or more hours.