It should appear in one of the slots (ports) within the software interface.

The is a powerful "last resort" for reviving "bricked" USB drives. While the interface may look dated, it provides the factory-level access required to reset the controller and bypass standard OS limitations.

Locate the specific version of the MPTool compatible with SSS6698-BA (often labeled as SSS6698 USB Flash Sorting or MPTool v2.xxx ). Extract the ZIP file to a folder on your desktop. 2. Configure the Tool

If the tool doesn't automatically detect your drive, you may need to select the correct .ini file manually via the settings or by editing the configuration file to match your flash memory type. 3. The Flashing Process

Using an MPTool is a "low-level" process. Keep the following in mind:

This usually means the firmware version in the tool doesn't match the NAND flash version. You may need to hunt for a different version of the MPTool containing the correct ISP (In-System Programming) files.

Do not disconnect the drive during this process. Once the slot turns Green and displays "PASS," the recovery is complete. Troubleshooting Common Errors

Confirm your controller is actually the SSS6698-BA. Use a utility like ChipGenius or Flash Drive Information Extractor to verify the Controller Part-Number.