Technicolor Td5336 Manual __top__ Site

Note: If 192.168.1.1 does not work, try 192.168.1.254 , which is also common for Technicolor devices .

Plug the power adapter into the router and a wall outlet. Turn it on and wait about 5–10 minutes for the lights to stabilize.

Before accessing the digital interface, ensure your hardware is connected correctly: Technicolor Td5336 Manual

Connect your DSL line to the grey port or, if using an external modem, connect an Ethernet cable to the red WAN port .

Enter your connection type (usually PPPoE or PPPoA) and the credentials provided by your Internet Service Provider (ISP). Note: If 192

Use one of the yellow LAN ports to connect a PC via Ethernet, or connect via Wi-Fi using the credentials on the router's bottom sticker. 2. Default Login Credentials

192.168.1.1 (Type this into your browser's address bar). Default Username: admin . Default Password: admin . Before accessing the digital interface, ensure your hardware

To configure your router, you must access its web-based control panel: