Upgrading the firmware is the single most impactful "mod" you can perform on the Sapphire Pro. It transforms a jittery, mediocre machine into a high-speed precision tool.
If you’ve added a BLTouch or 3DTouch sensor, ensure your firmware has UBL (Universal Bed Leveling) or Bilinear Leveling enabled.
Klipper offloads the heavy processing to a secondary computer (like a Raspberry Pi or BigTreeTech CB1). This allows for features like Input Shaper (which eliminates ghosting at high speeds) and Pressure Advance (which perfects corners and retractions). two trees sapphire pro firmware best
if you want a stable, traditional experience and want to keep your desk clutter-free.
The Sapphire Pro usually uses a BMG-style extruder clone. Your E-steps should typically be around 400-415 , but always calibrate this manually. Upgrading the firmware is the single most impactful
if you want the quickest path away from the buggy factory software with minimal tinkering.
Instead of flashing firmware every time you make a change, you simply edit a printer.cfg text file. Klipper offloads the heavy processing to a secondary
Extreme speeds (150mm/s+), amazing print quality, and a modern web interface (Mainsail/Fluidd).