Fixed - Unlock Bootloader Using Termux Link

Once the target phone shows the "Fastboot" or "Bootloader" screen, verify the connection again: fastboot devices Use code with caution. Step 6: Unlock the Bootloader

You must install the platform tools within the Termux environment. Step 1: Prepare the Target Device On the phone you want to unlock:

If Termux can't see the device, try running pkg install libusb . unlock bootloader using termux link

This allows you to connect two phones together.

Connect the two phones using the USB OTG cable. The host phone (with Termux) should be connected to the "USB-A" side of the adapter, and the target phone should be connected to the "USB-C/Micro" side. Once the target phone shows the "Fastboot" or

Ensure you are using a high-quality data cable. Some "charging-only" cables will not establish the data link.

Enable (Crucial: If this is greyed out, connect to Wi-Fi or wait a few days as per your manufacturer’s policy). Enable USB Debugging . Step 2: Install ADB & Fastboot in Termux This allows you to connect two phones together

This method uses the "link" between two phones via a USB OTG cable, allowing one to act as the "controller" and the other as the "target." Prerequisite: The "Link" Setup

Depending on your device age/brand, use one of these commands: fastboot flashing unlock For older devices: fastboot oem unlock

Brands like Motorola or Sony require a unique "Unlock Key" from their official website. You can fetch your "Unlock Data" via Termux using fastboot oem get_unlock_data and paste it into their portals. Conclusion