Unraid Reset Network Settings Install ((new)) -

If you prefer to fix the settings without a full reset, you can edit the configuration file manually using a text editor like nano on the CLI or Notepad on a PC. /boot/config/network.cfg

Once the desktop loads, open the local browser and navigate to to reconfigure your LAN manually. 4. Manual Configuration (Advanced)

To re-enable DHCP, ensure the following line is set: USE_DHCP="yes" . unraid reset network settings install

To set a manual address, set USE_DHCP="no" and define IPADDR , NETMASK , and GATEWAY . Troubleshooting Tips

rm /boot/config/network.cfg rm /boot/config/network-rules.cfg Use code with caution. Reboot the server by typing reboot . 2. Reset via USB Flash Drive (on another PC) If you prefer to fix the settings without

To reset Unraid network settings to the installation defaults, from the /boot/config directory on your flash drive and then reboot your server. This action forces Unraid to regenerate these files with default DHCP settings during the next boot. 1. Reset via Local Terminal

Note that many network changes in the WebGUI require the Array to be stopped before they can be applied. Reboot the server by typing reboot

If you cannot access the server's CLI or WebGUI, you can modify the boot drive on another computer. the Unraid server and remove the USB flash drive. Plug the USB drive into a Windows or Mac computer. Navigate to the config folder on the drive. Locate network.cfg and network-rules.cfg .

After a reset, the server will request a new IP from your router via DHCP. You can find this new address by typing ipconfig (for Windows) or checking your router's client list.