Use a trim tool to pop out the window switches, hazard light button, and blanking plates. Unplug the harnesses.
Apply thin foam tape to the contact points where plastic meets metal before reinstallation.
Disconnect the battery. Since you will be working near the airbag system, wait at least 30 minutes after disconnecting the negative terminal to allow the capacitors to discharge. Step 2: Removing Peripheral Components vw polo 6n dashboard removal updated
Open the glovebox and remove the screws along the top and bottom edges. Pull the unit out.
Removing the dashboard from a Volkswagen Polo 6N (produced roughly between 1994 and 1999) is a significant undertaking. Whether you are replacing a leaking heater matrix, upgrading your interior, or fixing persistent rattles, this guide provides an updated, step-by-step approach to help you navigate the process safely. Preparation and Tools Use a trim tool to pop out the
Remove the screws located near the footwells and under the ashtray. Lift the gear gaiter and remove the surrounding trim to access hidden bolts. Pull the console back toward the rear seats. Step 3: Removing the Instrument Cluster and Switches
Pull the three rotary knobs off. Remove the screws behind them to loose the heater control panel. You do not necessarily need to disconnect the cables; you can often push the unit back into the dash cavity. Disconnect the battery
Before you begin, ensure you have plenty of space and containers to organize your screws. Many of the interior screws look similar but vary slightly in length. Torx T20 and T25 screwdrivers Phillips head screwdriver Flathead screwdriver (for prying trim) 10mm and 24mm socket and ratchet Trim removal tools (plastic) Permanent marker and masking tape (for labeling wires) Step 1: Safety First
Open the front doors. Remove the plastic caps on the ends of the dashboard to reveal large bolts securing the dash to the A-pillars.