: Once successful, replace the original card with a blank writable card and click "Write Card" .
: The most common way to "download" the software is by connecting the ZXCOPY device to your PC using a Micro USB or Type-C cable while the device is on the "disclaimer" or "boot" screen. The PC will recognize the device as a removable U-disk (USB Drive) . You can then open the drive and find the ZX-COPY.exe or similar decoding software file inside.
: Press the "OK" button on the hardware device to enter the main interface and confirm the software shows a "successful connection" in the lower-left corner. zxcopy decoding software download link new
The is a specialized tool used primarily with high-frequency (13.56MHz) and low-frequency (125kHz) RFID duplicators, such as the ZX-COPY3. Its primary function is to decrypt and clone "full encryption" IC cards that cannot be copied by the hardware alone. How to Obtain the Download Link
: Once a card is decoded, the software facilitates writing that data to blank writable chips such as UID, CUID, or FUID. : Once successful, replace the original card with
: If the internal storage is corrupted or missing, users are encouraged to contact the specific merchant from platforms like AliExpress or Amazon where they purchased the device to receive a direct cloud download link.
: Connect the device to your PC via USB and stay on the initial disclaimer page. You can then open the drive and find the ZX-COPY
: Place the encrypted IC card on the reader's induction area and click "Start Decoding" in the software.